EchoVideo now has two additional media types to accompany the video, audio, and presentation types. Polls and Interactive Media.
A Poll is a question or activity panel that requests a response from the viewer.
Interactive media is what results when you add a poll to a piece of video or audio media. The poll "gates" the playback so that the viewer (student) cannot continue viewing or listening until they respond to the poll.
If you are an existing EchoVideo user who has used activity slides in your presentation slide decks, you will be familiar with polling slides and likely have many polls in your Library.
If you are a new EchoVideo user or you have not previously used activity slides in your presentation decks, you will have to create polls to add to your video/audio media to create interactive media.
Once you have polls in your library, however, think of them as reusable questions that you can embed into your media as needed. You can have a library of very specific polls that can be added to media without changing them. OR you can have a library of fairly generic polls, that you can edit the specifics of after they have been embedded. Use whichever approach works best for you.
What this means is that you can edit the Polls in your library, which changes ONLY that poll; these changes do NOT carry into any presentation or video the poll has been used in. You can edit the poll after it is embedded in the video or presentation, which changes ONLY that instance of the poll; those changes do NOT change the original poll in your library. Once added to media, the original poll selected and the poll in the media are two entirely separate entities and are managed separately.
Where do Polls come from
New Polls are created every time you create a new poll to add to a piece of video/audio or presentation media. Both of these actions create a new, reusable poll in your library.
If you were an existing EchoVideo user when the interactive media feature was launched, every activity slide you had in any presentation was converted to a Poll with the release of this feature. These can now be selected for addition to any video, audio, or presentation file.
If you have polls from converted activity slides, you may want to go clean up your library by removing duplicate polls.
How do I use Polls
Polls are re-usable objects that can be added to presentations or embedded into a video (or audio file). When a poll is added to a video, it creates a new piece of media called "Interactive Media". This media is now wholly separate from the video. More polls can then be added to the new piece of interactive media. Or you can add different polls to the same video, creating a different piece of interactive media.
Embedding a poll into video or audio media provides a "gate" for viewers. It requires the viewer to respond to the polling question in order to continue. Polls can be placed throughout a video, to ensure students are actually watching, and to ensure that they cannot move forward until they have submitted a response.
Like any type of polling activity, once you add a poll, you can edit it as needed to be specific to this media or class. You can change the question text, add, edit, or remove response options, change the image used, and request justifications.
Editing the poll after it is added to the media does not change the original poll. This means you can make your polls as generic or as specific as you want, depending on your preferred workflow.
Alternately you can create all of your polls individually for each media in which you need them, and once saved, they live in your library to use later, or remove if you don't need them anymore.
What Types of Polls are Available
If you are an existing user and you have Polls automatically generated in your library from existing polling/activity slides, all of those activities and types can be selected for use.
When you create a new poll, the types of questions available are the same as those available for adding activity question slides to presentations. They include:
Each type of poll has different parameters for responses, and all of them except Short Answer have the ability to identify a "Correct" response if appropriate. Refer to the above-linked articles for detailed information about how to complete each form and how the completed polls appear to students.
What Happens if I Edit or Delete a Poll
The short answer is "Nothing happens outside of the poll you edited or deleted."
If you edit a poll from within the presentation editor or interactive media editor, the poll in your library doesn't change. The opposite is also true; editing the poll in your library has no effect on the polls in any media that this poll was based on. The polls in your library are kind of like templates that way.
If you delete a poll, it simply deletes the poll. Any existing polling questions based on that poll remain in their media and can be used or edited (or removed) as needed.
What about Shared Media and Polls
If your library contained a shared presentation with activity slides in it at the time this feature was released, you may notice that the owner of some of the polls in your library is NOT you! These came from the shared presentation(s). And like ANY shared media, what YOU have is effectively a link to something owned by someone else, but accessible by you.
Because Polls are NOT changed by adding them to videos, you can use these shared polls to add polling questions to your media. Once added, the polling question in your media is entirely independent of the poll used to put it there.
The owner of the media can see to whom this presentation is shared in their media details page. The same is true of the shared polls in their library that are also visible in yours. If they click on the poll from their library, they can see your name as one of the people to whom this item is shared. Other users can also share polls with you separately from sharing a full presentation.
If the owner of the shared presentation "unshares" the presentation or "unshares" the poll, OR if YOU select to remove the shared presentation from your library, those polls go away too. However, any polling questions you added to media based on the poll remain right where they are.
Sharing of polls can be a very handy way for different instructors of similar courses to share the questions they ask across classes in different sections. Sharing a poll means that there is ONE template used for adding the polling questions to the media, ensuring at least some degree of uniformity. Yes, the questions can be edited after they are added, but it still ensures the base setup is the same.
Seeing Student Responses to Polling Questions
One common action is to go to the media details for a Poll and try to find responses to it. This won't work. Remember must be embedded into a video/interactive media in order to be viewable (and therefore answerable) by others. The same poll can be used in different places.
So, to view the responses to a poll, you must go to the polling tab of the media details page for the interactive media where it is embedded, OR to the polling tab for the EchoVideo course section where the media was published.
Currently, polls are only visible to others by embedding them and creating Interactive Media. Once it has been embedded and students have viewed and responded to the polls, those responses are visible in the Polling tab of the media details page of your interactive media. This is shown in the below figure.
Use the Course drop-down list to select which LMS/VLE course's embed to see the responses for (if there is more than one), and then the Poll drop-down, to see each student's response to the selected question.