Calibrating the MobiView Touchscreen
The MobiView touchscreen occasionally requires calibration. Calibrating ensures that the MobiView recognizes digital pen taps in the same place that you are actually tapping, writing or drawing on the touchscreen.
- From the MobiView Home Screen, tap Settings.
- Tap Calibrate Touchscreen.
- Per the on-screen instructions, tap each dot as it appears on the screen.
Use the digital pen for better accuracy during the calibration process.
- Tap Continue.
Changing the Language on the MobiView
The language can be changed on the MobiView.
- From the MobiView Home Screen, tap Settings.
- Tap Select Language.
- Tap the preferred MobiView language (and connected clickers).
Adjusting the Brightness on the MobiView
You can change the brightness of the MobiView touch screen. The amount of brightness will affect battery life; brighter screens use more battery. The MobiView touch screen dims after a set amount of time to maximize battery life. You can adjust both the default screen brightness and the amount of time the screen can sit without being used before it enters sleep mode.
If the screen dims while you are teaching, tap the screen with the digital pen or your fingertip.
- From the MobiView Home Screen, tap Settings.
- Use the digital pen to tap and hold the vertical line in the Brightness slider.
- With the digital pen tip on the vertical line, slide the vertical line:
- Slide to the right to brighten the screen
- Slide to the left to darken the screen.
- Remove the digital pen tip from the slider.
- Optionally, in the Sleep Timer section:
- Tap Plus to add more time before the screen enters sleep mode.
- Tap Minus to subtract time before the screen enters sleep mode.
Updating Firmware
Echo360 may periodically update the firmware on the MobiViewand the MultiHub. If WorkSpace or Flow detects a new version of the firmware for the MobiView or MultiHub, it generates a message at start-up on the MobiView.