Setting Up the Pen Station
The Pen Station conveniently clips to the side of the DualBoard so that the pens are able to charge when not in use. 1 Insert the clip into the Pen Station. 2 Attach the Pen Station to the side of the DualBoard. TIP Adjust the Pen Station by sliding the device to the desired location. 3 Connect one end of the power cord to the Pen Station and connect the other end to the controller. 4 Insert each pen tip-down into the Pen Station.
Mounting the DualBoard
WARNING
It is recommended that a skilled professional assess the strength of the wall and determine the appropriate hardware required to securely attach the DualBoard to the wall. A minimum of two people are required to safely lift and mount the whiteboard to the wall. Before You Begin If you are using a ceiling mount projector, ensure that the DualBoard is aligned with the projector image prior to mounting the board.
NOTE Due to the sizable number of wall types, hardware for the wall hanger and mounting clips is not included. 1 Attach the wall hanger to the wall. 2 Hang the DualBoard on the wall hanger. 3 Hook the mounting clips over the back lip of the DualBoard frame, positioning one mounting clip in each corner at the bottom of the board. 4 On the wall, mark the location of the mounting clip holes. 5 Install suitable wall anchors into the wall. 6 Install screws to secure the mounting clips to the wall. Use two screws per mounting clip. The recommended screw size is number 8 or M4.
The Pen Station conveniently clips to the side of the DualBoard so that the pens are able to charge when not in use. 1 Insert the clip into the Pen Station. 2 Attach the Pen Station to the side of the DualBoard. TIP Adjust the Pen Station by sliding the device to the desired location. 3 Connect one end of the power cord to the Pen Station and connect the other end to the controller. 4 Insert each pen tip-down into the Pen Station.
Mounting the DualBoard
WARNING
It is recommended that a skilled professional assess the strength of the wall and determine the appropriate hardware required to securely attach the DualBoard to the wall. A minimum of two people are required to safely lift and mount the whiteboard to the wall. Before You Begin If you are using a ceiling mount projector, ensure that the DualBoard is aligned with the projector image prior to mounting the board.
NOTE Due to the sizable number of wall types, hardware for the wall hanger and mounting clips is not included. 1 Attach the wall hanger to the wall. 2 Hang the DualBoard on the wall hanger. 3 Hook the mounting clips over the back lip of the DualBoard frame, positioning one mounting clip in each corner at the bottom of the board. 4 On the wall, mark the location of the mounting clip holes. 5 Install suitable wall anchors into the wall. 6 Install screws to secure the mounting clips to the wall. Use two screws per mounting clip. The recommended screw size is number 8 or M4.