The look and feel of Publishing is changing! Upcoming changes are identified in this article by providing screenshots labeled "Old UI" and "New UI".
The media shown in your Library is either posted to a course (added) or not. Typically class captures are posted to the course immediately after they are recorded. Unpublished media may only be visible in your Library or it may be available to other users through a Collection. All video, audio, and interactive media are available to Admins but that's a different article.
Instructors can ONLY post media to courses where they are enrolled as an instructor. Instructors who access the media details page for media can see where the item has been published but may or may not be able to change it if it happens to reside in a course where they are not enrolled. Only media OWNERS can remove media from a course.
Posting to a course / class can be done from the media tile menu in the Library, or from the Media Details page; both methods are described in the below procedure.
Click Library from the main menu.
To see whether the item has been published (and where it was published) click ON a media tile in the Library to open the media details page. Any courses to which the item has been published already appear at the top of the Share Settings area of the page, in the Classes section, as shown in the below figure.
Old UI |
|
New UI |
From here you can add the media to another class or course or remove / unpublish it as necessary.
Alternatively, you can add media to a class from the Class List page for a course.
Adding or Publishing Media to a Course
Publishing media to a course is done through the Classes section, which can be accessed in different ways, as described below. The box itself and the fields in it function the same way regardless of how you access it. Besides the Library-based methods described below, you can also post media to a course from any Collection where you have the Post permission.
To publish media to an EchoVideo course
- There are a few ways to open the Share to a Class dialog box:
-
Click the Add To A Class button in the Media Details page, located below the list of any locations where this item may already be published.
Old UI
New UI
The Class sharing modal appears.
Old UI
New UI
ALTERNATELY...FROM THE LIBRARY...
-
Click the menu button for a media tile and select Share
Then click the Class tab.Old UI
New UI
The Share modal is now only for quickly sharing content. Adding content to a Class or a Collection is now done from the Media Details page.
The Share Settings dialog box contains between one and four tabs, depending on what you have access to share media to. Everything else in the Class tab is identical and described below.
-
Click the Add To A Class button in the Media Details page, located below the list of any locations where this item may already be published.
- Use the course drop-down list at the top of the modal to select the course where you want to share this media.
- Use the term and section drop-down lists (which become active after selecting a course) to select the term and section where you want to share the media.
Old UI
New UI
- Select whether you want to share this media with an Existing Class or create a New Class to hold this media.
- For an Existing Class, use the drop-down list to select which class to share the media with.
Old UI
New UI
- For a New Class, enter a Name and / or a Start Date and Start Time for the class, as well as a Duration.
If typing in the field, Start Date can be entered in mm-dd-yyyy format or in yyyy-mm-dd format, depending on your regional settings; Start Time can be entered in 12-hour using the AM / PM button.
NOTE: Classes must have either a Name or a Date / Time / Duration and typically have both, but only one or the other is required. A Description is optional.Old UI
New UI
- Click the Calendar icon to open the date-picker to populate the Start Date field if necessary.
Old UI
New UI
- If necessary, change the Availability settings of the newly shared item. By default, the item will be available now (immediately) and unavailable never (available indefinitely). Leave this as the default or you can set availability as follows:
- available now: Students can view the shared media as soon as you finish publishing it. This is the default
- available never: The media is shared with the class but students cannot see it. This is the same as making availability manual (you must set the item to be available when you are ready).
- available date: The media will be unavailable until midnight on the specified date, at which time students will be able to view the media.
- unavailable never: The media is available to students and will continue to be unless this is changed. Along with 'available now', this is the default.
- unavailable date: The media will become unavailable to students at midnight on the specified date.
- If setting Date-based availability, selecting the Date option activates the date field and the calendar icon for using the date picker. You must enter a date if this option is selected.
Old UI
New UI
- When finished, scroll to the bottom of the Sharing modal and click Share.
NOTE: If the Share button is not active, review the fields in the modal and be sure you have completed all the necessary items. - Repeat the above steps to share to a different course.
The media now appears for the selected (or created) class on the Class List page for the course. If you created a new class to hold the media and the class has no date, your new class appears at the bottom of the class list by default. You can reorder the class list and change its location if necessary.
Removing media from an EchoVideo course
Once posted to a course (published), media can be removed from any class(es) in which it resides. This is done from the Media Details page.
Alternatively, you can remove media from a class via the Class List page for a course.
IMPORTANT: Removing media from a class removes any student notes or bookmarks, as well as class Q&A and all student viewing analytics associated with the item. This information is not recoverable. If you want to retain this data but not allow students to view the media, consider making it unavailable instead.
To remove media from a class
- Click on a media tile in your Library to open the Media Details page.
- Scroll down to the Share Settings Classes section of the Media Details page and click the X located to the right of the course / class you want to remove this media from as shown below.
Old UI
New UI
- Click OK on the Warning message that appears.
When finished, the media no longer appears in the class / course from which it was removed, though the class remains in the course.