To use RemotePoll with an EchoPoll session, you must first download the software. 

Set Up a Direct Session Connection in RemotePoll

1. Open RemotePoll.

   The Polling tab is selected by default.

2. Enter the Session ID in the field provided, as shown in the figure below.
3. Optionally, enter a Description.
4. Click Connect, as shown in the figure above.

Set Up a Direct IP Connection in RemotePoll

1. Open RemotePoll.

   The Polling tab is selected by default.

2. Enter the IP / Domain Name in the field provided, as shown in the figure below.

3. Enter the Port Number in the field provided. 

   The default port number is 1025.

4. Optionally, enter a Description.
5. Click Connect, as shown in the figure above.