The EchoVideo Pro is the newest (3rd) generation full-service capture device by Echo360. It was placed into service in December 2015. The Pro contains a 120GB hard drive, with 90GB available for recordings.
- Mount in a standard 19" A/V rack
- Set on a tabletop or shelf
The allowable operating temperature of the EchoVideo Pro device is between 0° – 50° C (32° – 122° F). Be sure to install the device in a location where the temperature around the unit does not exceed this limit. If operated in an environment where temperatures exceed this limit, the unit may overheat and malfunction permanently.
- Capture full-motion output from any of the following types of device connections, including document cameras, electronic whiteboards, and computers
- Full-motion encoding records applications, annotations, embedded video, and animations.
- Capture input resolutions from 640×480 to 1920×1200.
- Provides H.264-encoded output with configurable frame rates including 12.5/14.985fps or 25/29.97fps at bitrates from 120kbps to 15Mbps.
- All input aspect ratios supported.
Appliance Display Resolutions
You can download the Pro_Appliance_Display_Resolutions.xlsx spreadsheet (86 KB) with all of the specific resolutions.
- DMT: Display Monitor Timing lists standard display timings for various resolutions and screen sizes.
- GTF: Generalized Timing Formula is a video timings standard.
- CVT: Coordinated Video Timings (CVT) is a replacement for GTF.
- CVTRB: Video Timings-Reduced Blanking is a VESA standard that offers reduced horizontal and vertical blanking for non-CRT-based displays.
- Fullscreen (4:3) standard definition input resolutions from QCIF to D1.
- Widescreen (16:9) high definition input resolutions from 480p to HD-1080p.
- Provides H.264-encoded output with configurable frame rates including 12.5/14.985fps or 25/29.97fps at bitrates from 120kbps to 3.2Mbps.
- Audio encoding in stereo, mixed-mono, or mono.
- Audio capture in AAC, sampled at 22.05kHz or 44.1kHz, encoded at bitrates from 32kbps to 128kbps CBR.
- Options for pro-level (+4dBu/1.228Vrms/1.737Vpk) or consumer-level (-10dBv/0.316Vrms/0.447Vpk) signals.
- Professional line-level audio input with bare wire termination for direct wiring of stereo balanced (non-powered) or unbalanced audio.
- Consumer line-level audio input with a stereo RCA connector.
NOTES about HDMI Audio
- HDMI audio can only be utilized when also capturing HDMI video. For example, if you have an HDMI input and a VGA input connected on Channel 1, you could not use VGA for video and HDMI for audio.
- All selected audio inputs are mixed. Meaning if HDMI audio is enabled for either/both video channels, the sound feed from HDMI input(s) will be combined and synced with the Audio channel feed (Balanced or Unbalanced). To use ONLY the HDMI audio, select None or Mute for the Audio channel input (depending on where the configuration is being done - the EchoVideo UI or the front panel of the PRO.
- We currently support two-channel PCM encoded audio over HDMI, however, high data rate encoded audio (like Dolby 5.1) is not supported.
These packaging options produce viewable media for students:
- Podcast. MP3 audio
- Vodcast. M4V audio and motion display
- Audio Rich Media. HLS-based audio and display (browser)
- EchoPlayer. HLS-based audio, video, and display (browser)
Signal Processing and Encoding
Signal pre-processing includes decimation, automatic de-interlacing, and noise reduction.
- Dimensions: 431mm wide x 317mm deep x 44mm/1RU tall (without mounting options)
- Weight: ~11.8lbs / 5.4kgs
- Internal temperature sensors with temperature-dependent, variable speed, forced-air cooling
- World-compatible direct AC connection; input voltage: 90-240vAC 50/60Hz, using an IEC320-C13 cable
- Operating environment: 0°-50°C (32°-122°F) ambient temperature
- Operating humidity: 25% to 80%, non-condensing
- Power requirements: 100vAC to 240vAC, 50/60Hz
- Power consumption & heat: 62 watts (212 BTU/hr) max, 50 watts (171 BTU/hr) during capture
- UL 60065, 7th Edition, 2006-11-20
- FCC CFR47 Parts 15:107/15:109