The QT2 clicker device takes the response experience to a new level of performance. Providing the same features as other RF clickers, the QT2 expands the functionality by offering capabilities such as a full QWERTY keypad and a backlit screen for easy viewing. The QT2 provides the richest and most fulfilling response experience ever.

QT2 clickers ship with a plastic tab in the battery compartment to preserve battery life. Before using your clicker, remove the battery cover and remove the tab.

Press any button to wake up your clicker. It will shut off automatically after several minutes.

Changing the Channel

Your instructor will provide you with the channel number they are using in class. Use the steps below to check your clicker’s channel and change to the correct channel.

If the lock symbol appears next to the channel number, the channel cannot be changed.

1. Press the CH button.
2. Use the number pad to enter the new channel number.
3. Once the channel number has been entered, press OK.

Finding Channels

If you don’t know the channel number you need to connect to, you can scan to find receivers in range. Use the steps below to find a receiver within range of your clicker.

1. Press the CH button.
2. Press the middle ^ key, indicated on the screen by the signal icon to scan for the receiver(s) within range.
   

   The QT2 will display a loading screen while it scans for any receivers within range.

3. Use the arrow keys to scroll through available channels.
   

   The QT2 will display “Can’t Find Channels” if no active receivers are in range.

4. Press OK to select the channel.

Responding

During a polling session, your QT2 clicker will prompt you to enter the proper response. An indicator appears in the top left of the clicker screen for each question type. When you respond to a live polling question with your clicker, the LCD screen will display the answer you’ve chosen. After typing your answer, be sure to click OK on the clicker to submit your response to the question.

When sending a response or when a response is successfully received, an icon appears at the bottom center of the screen. The following are graphic representations of these icons:

Participating in a Polling Session

You can use your QT2 clicker to submit your responses during PowerPoint polling or Anywhere polling. Once your instructor opens the polling session, follow the steps below to submit your answers using your QT2 clicker.

1. Press any button on the QWERTY keypad to wake up your clicker.
   

   You will see a Welcome message, followed by a battery check, and the loading screen while the test loads.

2. You may be prompted for your ID.
   1. Press the Backspace key to clear the information displayed.
   2. Enter your ID.
   3. Press OK.
      

      You are now in the Test and you can use your QT2 clicker to submit your answers.

3. Enter a response for each question in the test. Use the left and right arrow keys to move forward or backward through the test questions.
4. Respond to each question in the test based on the question type. When your answer has been submitted for a question, the question number will be displayed at the top of the LCD screen.
   • Single Response - Press the function key below your answer choice. Up to five answer choices will be visible on the QT2. Press the up / down arrows to view more choices. Answer choices can be alpha or numeric.
   • Multiple Response - Use the number pad to enter your answer choices and then press OK once you have made your selection. Answer choices can be alpha or numeric.
   • Short Answer / Essay - Use the keyboard to enter the answer text and press OK. The available number of remaining characters is indicated in the upper right of the screen.
   • Numeric Response - Enter the response using the number pad and press OK.
   • True / False - Press the function key below your answer.

Toolbox and Function Icon Keys